PLEASE READ BEFORE USE
· Do not leave appliance unattended when
plugged in. Unplug from outlet when not
in use and before servicing and cleaning.
To avoid electric shock, do not expose to
rain. Store Indoors.
· Never pick up inflammable or combustible
liquids such as petrol or other volatile
substances. Do not vacuum boat bilges
since flammable liquids or fumes may be
present.
Never use in the presence of explosive
liquids, vapours or explosive dust - such
as coal or grain.
Never pick up asbestos or asbestos dust.
Do not pick up anything that is burning
or smouldering - such as cigarette ends,
hot coals, matches or similar.
Do not allow the cleaner to be used by
children.
Only use the product as detailed in these
instructions.
Use only manufacturers recommended
attachments and consumables.
Never modify the cleaner in any way -
this is dangerous and will invalidate the
guarantee.
Do not use cleaner without the filter in
place.
If motor sound becomes higher pitched
always
check for the following:
1) Blocked hose or accessory.
2) Blocked filter.
3) Full container.
Never try to move the cleaner by pulling
with the mains lead.
Always check that the filter is clear and
not blocked. Keep all openings clear of
any blockages.
When lifting the unit always lift it with the
handle or under rim of bucket.
Beware of excess weight.
Always switch the unit off before
changing between vacuum and blower
functions.
Always be aware of the direction of the
blow outlet or deflector elbow when using
the unit.
UNPACKING AND SETTING UP
1) Remove all packing materials and accessories and lift unit out of the box.
2) Release the two tank clips and lift the motor housing off from the recovery tank.
3) Remove all components from inside the tank.
4) Fit the castors to the outriggers. These should be pushed in hard until they stop. Turn the recovery tank
upside down and fit the outriggers to the tank. Once fitted these can remain in place permanently.
5) Push the Hose Inlet into the hole in the side of the Recovery Tank. The Hose Inlet must be pushed in
from the outside of the Recovery Tank ensuring that the lug on the side of the Hose Inlet is lined up
with the slot in the hole in the Recovery Tank. Grasp the Hose Inlet from inside the Recovery Tank and
pull with an up and down motion to engage. Make sure that the clips on the top and bottom of the
Hose Inlet are fixed into place inside the Recovery Tank. Once installed the Hose Inlet can remain in
place permanently.
6) Fit the outlet elbow to the outlet on the motor housing. The outlet elbow can be used to deflect airflow
from the motor away from the work area.
2
INTRODUCTION
Thank you for purchasing an Earlex Wet and Dry Vacuum. The uses for this product around the home,
garage, workshop and garden are numerous and we hope you will find the product is in constant use. This
cleaner can be used for picking up all kinds of dry material such as dust, brick dust, nails, broken glass,
leaves, litter, wood shavings etc. In wet mode it can pick up various types of liquid spills and help to
unblock sinks. In blow mode it can be used for jobs such as collecting leaves into piles, dusting out the
garage or workshop.
Due to the heavy duty nature of a wet & dry cleaner the motor may sound louder than your normal
cleaner. In order to be able to pick up liquids, a special by-pass motor is fitted so that the liquid can be
deposited into the recovery tank without going through the motor.
Before leaving our factory each unit has been checked to ensure that it meets our high safety, quality and
performance standards.
SAFETY RULES
(22 pages)
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals